A perfectly manicured Driveway Pavers, right after the way in of your home, has the power of converting your home in to a mansion. It's been observed numerous times, how this can fine-tune the general looks & the beauty of your home.
Earlier, you always needed a professional to make such an elegant arrangement. However, in case the total area to be paved is not over 500 square feet, you can yourself initiate the construction technique. that you need some kind of practicality to your approach, tiny little bit of arithmetic, few weekend hours & of-course a set of tools. Your driveway is prepared!
The first step in the construction of Driveway Pavers is to make a proper planning. Make a diagram of the area which needs to be converted in to a driveway. You ought to carefully note down the existing building, or any structure which needs to be altered.
Second step includes arranging the proper materials such as construction tools & the paving stone/granite which will be finally used in the paving.
Excavation is the third step. For the vehicles to pass comfortably, you need to excavate close to 9’ to 12’ of land. Five times excavated, you can use a leveler to level the land.
A single layer of sand is always recommended above the excavated land & below the pavers. This is the fourth step.
The next step includes arranging the driveway pavers: mostly stones or granites. You ought to cut these accordingly, as per the necessity & arrange them as per the plan. The pavers must be either diagonally or in the diamond pattern arranged on the sand bed. The ends ought to be at 90 degree to each other. If necessary, the stone also needs to be cut using the stone cutter. Wearing of the safety glasses is always recommended
That’s it. The paved driveway is prepared. Let the sand & the paved stones for few days to be properly set in.